without BrushlessVoltage: 20VNo-load speed: 0-550/0-2000rpmMax impact rate: 30000bpmMax torque: 60NmMetal chuckChuck capacity: 13mmTorque settings: 22+1+1Mechanical 2-speed gearSpindle lock functionAuto-lock keyless chuckIntegrated LED work lightInclude:1pcs Cr-V 65mm bit3 Pcs masonry drill bitsVOLTAGE: 20VNO-LOAD SPEED:3000/6000/9000 R/MINDIS..

1 Pcs 12V Lithium-Ion 1.5Ah battery1 Pcs battery pack1 Pcs 2Hr charger 220V-240V~50/60Hz1 Pcs Magnetic bits holder1 Pcs SL5.5×100 Screwdriver1 Pcs PH1×100 Screwdriver1 Pcs 7 Inch Combination Pliers1 Pcs 6 Inch Adjustable Wrench1 Pcs 8Oz Mini Claw Hammer1 Pcs Test Pencil（100-500VAC）1 Pcs 3M Steel measuring tape1 Pcs 9mm Snap-off blade knife5 Pcs Twi..

Voltage: 12 voltsSpeed: 400/1500 rpmForce: 20 NewtonInternal spotlight for lightingBattery charging time: 2 hours2 batteries includedWithout chargerBatteries are charged via a Type C ..

VOLTAGE: 20VNO-LOAD SPEED: 0-450/0-1900 RPM / MINMAX TORQUE :70NMCHUCK CAPACITY : 13MMTORQUE SETTINGS : 13+ 1INTEGRATED WORK LIGHT2 BATTERIES 2A.H BAG+CHARGER+BITS..

Voltage: 12 voltsDimensions: 7 inch3 speeds 1.5 amps External battery With 12 volt batteryType C charger..

Power: 1500WPressure: 90 BarFlow: 480L/HWater Hose: 8M90° Extension..

Voltage:220-240V~50/60HzInput power:400WNo-load speed:14000rpmMax blowing rate:3.0m³/minWith 1pcs dust bagPacked by color box..

VOLTAGE: 20VNO-LOAD SPEED:3000/6000/9000 R/MINDISC SIZE: 4.5''BATTERY AND CHARGER NOT INCLUDED..

Voltage:12VNo-load speed:0-750rpmMax torque:20NmPlastic chuckChuck capacity:0.8-10mm(1/32-3/8")Torque settings:15+1Integrated work lightInclude:1 Pcs 1.5Ah battery pack Battery charging port: USB type-CCharger sold separately..

without BrushlessVoltage: 20VNo-load speed: 0-550/0-2000rpmMax impact rate: 30000bpmMax torque: 60NmMetal chuckChuck capacity: 13mmTorque settings: 22+1+1Mechanical 2-speed gearSpindle lock functionAuto-lock keyless chuckIntegrated LED work lightInclude:1pcs Cr-V 65mm bit3 Pcs masonry drill bits(TFBLI20011)Volts:20VLithium-Ion 2.0Ah battery(TF..

Voltage:220-240V~50/60HzInput power:1050WNo-load speed:600-2600rpmGrinding pad diameter:215mmSanding paper diameter:225mmDust hose diameter:38mmInclude: 6pcs sand papersWith 3pcs connection adaptersWith 2m flexible pipeWith 1pcs extension barWith 1pcs dust bagWith 1set extra carbon brushes..

Voltage: 220-240V~50/60HzInput power:1400WMax Pressure:130Bar(1900PSI)Flow rate:5.5L/min1 set water spray gun(TGTSG026)5m high pressure hose(TGTHPH526)Copper wire induction motor..

Voltage: 20VSize: 13"Speeds: 3Electric or battery operatedWithout battery and charger..

Voltage: 220-240V~50/60HzInput power: 1500WNo-load speed: 850rpmImpact rate: 4400bpmImpact energy: 5.5JMax.drilling capacity :Concrete:32mmSteel:13mmWood:40mmSDS plus chuck systemAnti-vibration systemWith 3 drills and 2 chiselsWith 1set extra carbon brushes..

Volts:20VLithium-Ion 2.0Ah batteryLED battery power indicatorOne battery fits all P20S multiple tools..

Voltage:12VCurrent:18AMax pressure:120PSI/8BARIntegrated work lightWith 1pcs battery clipsWith 4pcs adaptersWith 1pcs 5m air hose with a brass quick-releasing adapterWith 1pcs canvas bag..

Voltage: 220-240V~50/60HzCarbon brush motorAluminum wireInput power: 1400WMax pressure: 110Bar (1595PSI)Flow rate: 5.6L/minAuto stop systemInclude:1 Set water spray gun1 Pcs 5m high pressure hose1 Pcs water inlet screw..

POWER:  600WNO LOAD SPEED: 3300RPMCHUCK: 13MMAttachments : 2 Rosetta Screwdriver 2 Pliers - Digital Test Pencil - Scissors - Bits - 2 Screwdrivers - Ratchet screwdriver - Flashlight - Adjustable wrench - Socket Set - Screwdriver Bits - Hex keys- Pump Plier - Cutter- Meter - Electrical Solder Tape - Multi Use Key - Hammer- Spirit level 3 e..

Voltage: 12 voltsNo-load speed: 0-750rpmMaximum torque: 20 NmPlastic chuckChuck capacity: 0.8-10mmTorque settings: 15+1Built-in LED work lightIncludes:1pcs 1.5Ah battery (JDLBS5150)Battery charging port: USB Type CCharger sold separately..

Voltage: 220-240V ~ 50/60HzInput power: 400W No-load speed: 14000rpmMaximum blowing rate: 3.2 m³/minCable length: 2 metersIncludes:1pc dust bag..

Voltage:220-240V~50/60HzInput power:1050WNo-load speed:1100rpmImpact rate:3800bpmImpact energy:4.5JMax.drilling capacity :Concrete :26mmSteel:13mmWood:40mmSDS plus chuck systemWith 3 drills and 2 chisels..

High hardness Lifting force up to 2 tons Integrated safety valve to prevent overloading Lifting System Control - Storage bag for protection and safe transportation- Minimum height: 128 mm  Maximum height: 300 mmCurb height: 172 mmmaximum. Lifting load 2000kg Minimum height 128mmMaximum height 300mm Includes storag..

Voltage: 220-240V~50HzInput power:1500WMax Pressure:100Bar (1450PSI)Flow rate:6.0L/minContains 1 set water spray gun8m high pressure metal hoseCopper wire induction motor..

Self-priming water  motor, 1 HP, 750 Watt..

Brushless motorVoltage: 20VNo-load speed: 0-1100rpmImpact rate: 0-5400bpmImpact energy: 2.0JMax.drilling capacity:Concrete: 22mmSteel: 13mmWood: 28mmIntegrated work lightSDS Plus chuck system3 Pcs drill bits(6mm,8mm,10mm)..

Voltage: 220V/50HzRated power: 2000 wattsTemperature: I: 350°C, II: 600°CAir flow: I:300 l/min, II:500 l/min..

Voltage:4VHex Shank:1/4″No-load speed:240rpmMax torque:5NmIntegrated work lightCharge level indicatorCharging via USB type-C cable(cable soldseparately)..

Voltage 20V No-load speed 0-18000/minMax. air volume 2.7m3/minMax. speed Air Speed: 38m/sBattery Not included , compatible with 2.0Ah and 4.0Ah batteriesCharger Not included..

Power: 1800W Pressure: 120Bar Flow: 480L/HWater Hose: 8M 90° Extension..

 the rotating speed at no-load is 240 rpm/min the maximum torque is 4 N/m equipped with 10 bits with 25 mm Cr-V heads equipped with a box for easy carrying and storage voltage: 4V with USB charging cable ¼" hex shank built-in LED light..

POWER: 280WNO-LOAD SPEED: 15000 RPMVOLTAGE: 220V..

“Voltage: 220V-240V ~ 50/60HzPower input: 400 wattsNo-load speed: 14000rpmMaximum inflation rate: 3.0m3/minWith 1pc dust bag..

BATTERY 4V LI-ION / 1.5AHNO LOAD SPEED 0 - 240 RPMTORQUE MAX. 4 NMCHUCK CAPACITY 1/4"CHARGER 2 HWEIGHT 0.5 KGACCESSORIES: 19 PCSWITHOUT CHARGER..

Sharp pliers3x40mm grooved screwdriver5x75mm grooved screwdriverPhillips PH0x40mm screwdriverPhillips PH1x75mm screwdriverWire-cutting scissorsLead welding torch and lead welding torchWelding wireVacuum pump125mm tweezers140mm Test Pencil..

19PCS drill bits & setscrewdriver bits set7pcs HSS Rolling twist drill bits  SIZE:2,3,3.5,4,4,5,6mm4pcs Masonry drill bitsSIZE:4,5,6,8mm8PCS 25mm Screwdriver bitsSL4.5,SL5.5,PH1,PH2,PZ1,PZ2,T20,T30..

1 pc 7″ Combination Pliers1pc 6″ Long Nose Pliers1 pc 6″ Diagonal Cutting Pliers..

Voltage:220-240V~50/60HzInput power:800WNo-load speed:0-15000rpmBlowing rate:0-4.5m?/minWith 1pcs dust bagWith 1pcs flexible tubeWith 2pcs suction nozzlesWith 1set extra carbon brushes..

without BrushlessVoltage: 20VNo-load speed: 0-550/0-2000rpmMax impact rate: 30000bpmMax torque: 60NmMetal chuckChuck capacity: 13mmTorque settings: 22+1+1Mechanical 2-speed gearSpindle lock functionAuto-lock keyless chuckIntegrated LED work lightInclude:1pcs Cr-V 65mm bit3 Pcs masonry drill bits(TFBLI20011)Volts:20VLithium-Ion 2.0Ah battery(TF..

Voltage: 20VNo-load speed: 0-400/0-1500rpmMaximum torque: 45 NmPlastic chuckChuck capacity: 0.8-10 mm (1/32-3/8 inch)Torque settings: 15+1Two-speed mechanical gearSpindle lock functionBuilt-in LED work lightIncludes:1pc Cr-V 65mmBattery and charger sold separately..

Rated voltage(V):220-240Rated frequency(Hz):50Max.output(kW):0.8Rated output(kW):0.65Rated speed(rpm):3000Engine:2 strokeDisplacement(ml):63Cooling system:Air-cooledStarting system:RecoilAluminum wire alternatorFuel tank(L):4.0Dry weight(Kg):16.5..

Rated voltage(V):220-240Rated frequency(Hz):50Max.output(kW):3.5Rated output(kW):2.8Rated speed(rpm):3000Engine:4 stroke,OHVDisplacement(ml):208Cooling system:Air-cooledIgnition system:T.C.IStarting system:Recoil+ElectricCopper wire alternatorFuel tank(L):15Dry weight(Kg):51..

Voltage:12V No-load speed:0-400/0-1500rpmMax torque:20NMChuck capacity:0.8-10mmTorque settings:15+1Mechanical 2-speed gearIntegrated work lightLED battery power indicatorWith 1pcs 1.5Ah battery pack（WLBS5150）Battery charging port: USB type-CCharger sold separately61pcs 25mm length screwdriver bits ..

POWER: 1200WMAX PRESSURE: 90BAR (1900PSI)FLOW RATE: 5.5L / MINAUTO STOP SYSTEM1 SET WATER SPRAY GUN..

Voltage 20V 5 inch No-load speed Vibrational frequency: 0-10000/minMax. speed  Vibration: 12 speed (adjustable)Battery  Not included, compatible with 2.0Ah and 4.0Ah batteriesCharger Not includedDiameter Suction cup: 125mmMax. force Absorption: 50kg..

Standard nozzle:1.5mmPattern width:180-250mmPaint capacity:400ccSuitable for base coatOptional nozzle:1.5-2.0mmOperation pressure:3-4barAir cons:3.5-6.0cfm(99-170l/min)..

GSB 120-LI PROFESSIONALCORDLESS COMBI12V1.5Ah23 PCS acc.Highly flexible , highly economicalPower and flexibility within reach for screwdriving and drilling2-speed gearbox enables high productivity and excellent torqueElectronic Cell Protection for longer battery life and more durability..

Voltage: 12 voltsNo-load speed: 0-400rpm/0-1500rpmMaximum torque: 20 NmChuck capacity: 0.8 - 10 mmTorque settings: 15+1Mechanical gear with two speeds2 batteriesIntegrated work light..

Brushless MotorCharge volts:220V-240V~50/60HzVoltage:20VNo-load speed:3000/9000rpmDisc diameter:115mmSpindle thread:M14Include:1 Pcs 3.0Ah battery pack (JDLBP530)1 Pcs charger (JDFCP518)..

Voltage: 220-240V~50HzAluminum wire induction motorInput power: 1200WMax pressure: 90Bar (1305PSI)Flow rate: 5.0L/minAuto stop systemInclude:1 Set water spray gun1 Pcs 8m high pressure metal hose1 Pcs 2m inlet hose1 Pcs quick connecter1 Pcs water inlet screw..

Brushless motorVoltage: 20VNo-load speed: 0-1100rpmImpact rate: 0-5400bpmImpact energy: 2.0JMax.drilling capacity: Concrete: 22mm Steel: 13mm Wood: 28mmSDS Plus chuck systemIntegrated LED work lightInclude:3 Pcs drill bits(6,8,10mm)1 Pcs chisel1 Pcs charger(JDFCP518)1 Pcs 3.0Ah battery(JDLBP530)Charge volts: 220-240V~50/60Hz..